3 Ways to Connect your Soundbar with Projector – 2022

Soundbars and projectors have come a long way, and they will significantly improve the audio and video streaming experience. Can you use a projector and a Soundbar together? If the projector is in the back of the room and the Soundbar is in the front? Connect Soundbar with Projector.

You can use an extended HDMI cable, RCA cable. If not, You can use another form of compatible cables. You can use to link a Soundbar to a projector. This entails routing the cables throughout the room (ex. hidden behind the wall). Using a wireless transmitter is another alternative (Bluetooth, HDMI, etc.).

When dealing with a projector, you should use a Soundbar. You should need to use soundbar in the same way as you would other types of speakers. In this case, however, you can link each device whether the projector is the media source or an external source.

Since the Soundbar will be acting as the receiver in this situation. It would only take a few more existing connections. Let’s look at it more closely.

[su_label type=”black”]How to connect a Soundbar with a Projector?

If you like the sound quality your Soundbar produces and want to attach it to your projector. You might think that connecting the two devices is as easy as plugging them in with the right cable. Unfortunately, there is one major flaw with this: the two devices should be placed on opposite sides of the room.

Since the Soundbar (front) and projector (back) are on opposite sides of the space. You’ll need to link the Soundbar to the projector with either a compatible extended cable that runs along the wall or ceiling, or a wireless transmitter. Bear in mind that you’ll need

Of course, this relation presupposes that you’re using a standard long-throw projector. Even if you’re using a short-throw projector. You’ll need to run an extended cable because the throw distance is likely to be greater than a standard cable will reach.

The extended cable would only be useful if you’re using an ultra-short throw projector that sits near enough to the panel for the Soundbar to attach to it with a regular cable.

You will be able to easily connect one computer into the other with a compatible cable in this situation. Even, since many users are talking about short or long throw projectors (as opposed to ultra-short throw projectors). It’s important to think about how the gap between your Soundbar and projector will affect your communication options.

So, if you want to link your Soundbar to a short or long throw projector (rather than an ultra-short throw projector), consider the options below for a reliable connection.

Make sure to consider the media source. Projector (which can also serve as the media source), and Soundbar in terms of usability.

[su_label type=”important”]Connect Through Extended HDMI Cable[/su_label]

The port compatibility options between your Soundbar and your projector are likely to be HDMI ports, particularly when working with newer projectors.

If this is the case, you can link the two devices with an HDMI cable. If you’re using an older projector, you may discover that it doesn’t support HDMI. You may use an HDMI converter on the end of another form of cable or use another type of link in this case.

Our Top Pick
 HDMI Cable 8K/4K

These HDMI cables (male to male) connect televisions / TV / Projectors sets or monitors with Blu-ray players, soundbars, gaming consoles and other equipment with an HDMI output. As monitor, projector or TV cables, they deliver fantastic picture and sound quality

Still, keep in mind that your projector will most likely be in the back of the room (especially if you’re using a long-throw projector) or in the middle of the room (using a short throw projector)

If the HDMI cable isn’t hidden, it can get in the way of your screen (if it’s hanging) or become a tripping hazard (if secured to the floor and run in this direction).

Having this in your mind, consider the following steps for connecting your Soundbar and projector with an extended HDMI cable (and keep in mind that the same steps can be used with a digital optical cable):

[su_service title=”1. Choose the right cable.” icon=”icon: check” icon_color=”#16a202″ size=”26″]If you want to link your Soundbar and projector with an HDMI cable, make sure that all of these devices support this form of cable. You should double-check your device’s specs to make sure they both support an HDMI cable. After you’ve checked this, choose an extended HDMI cable that’s long enough to span the gap between your Soundbar and your projector. Consider an option that allows for some flexibility, as you’ll need to switch the cable out of the way and cover it from view. [/su_service]

[su_service title=”2. Plug the extended HDMI cable into the Soundbar, projector, and external media source if applicable.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

If you are using your projector as the source of media, then you will only need to connect your Soundbar directly to the projector. However, if you are using an external media source like a laptop or DVD player, then you will need to connect all three devices.

Whichever option you choose, be sure to connect a cable capable of transmitting the audio and video signals between the devices. So, you can use an HDMI cord to connect the Soundbar to your laptop, for example, and then connect the Soundbar to the projector after as well.


[su_service title=”3. Ensure that the HDMI Source is selected on your projector.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

After you’ve connected the HDMI cable, make sure the projector is set to use the Soundbar (HDMI) as the audio source. Make sure your projector’s settings are set to the HDMI source as your desired output.


[su_service title=”4. Run a performance test.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Before you go to the trouble of hiding your HDMI cable, double-check that everything is in working order. Run a test by streaming an audio-only file, such as a music video of your favorite song. Assuming everything is in order, you’re ready to move on to the next level. If it doesn’t work, you’ll need to figure out what’s causing the problem.


[su_service title=”5. Hide the extended HDMI cable.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

It’s time to hide the extended HDMI cable now that you’ve linked the Soundbar to your projector (and any other media sources if applicable) and checked that everything works.

Not only is leaving the cable out visually distracting and unappealing, but a dangling cord may also be a safety hazard in your home theatre.

You have the choice of hiding it in a variety of ways. There are many choices, including covering it behind sheet rock, running it through the roof, or using a cable track that can be secured to the floor or wall. In any case, you must ensure that your home theatre room does not have any loose cords.

[su_label type=”important”]Connect Through RCA Cables[/su_label]

When attaching your Soundbar to a projector, RCA cables are another choice to consider. Of course, this choice is only feasible if both of your devices are compatible with this cable. Even, attaching a soundbar to a projector in this manner isn’t difficult; you’ll only be using an analogue cable rather than a digital one.

Our Top Pick
 Monoprice 1.5ft Premium 2 RCA Plug

With Monoprice’s Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers. This is a premium two-channel audio cable made of RG-59 75 ohm coaxial cable.

Consider the following steps to link your Soundbar to a projector using RCA cables:

[su_service title=”1. Choose an extended cable.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Just like with an HDMI cable, you will need an extended RCA cable option that can connect your Soundbar (in the front of the room) to your projector (in the back of the room). Be sure to choose a high-quality cable for the best audio and video signal transmission.


[su_service title=”2. Plug in the RCA cables.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Again, if you are using an external media source. Necessary is that you will need to make sure that all three devices are connected. Plug in the RCA cables between your Soundbar and projector. Then a compatible cable between the Soundbar and the media source as well.


[su_service title=”3. Ensure that the RCA input is your preferred option.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Just like you would with the HDMI input, you will need to adjust the settings on your projector . Your projectors will automatically choose the RCA input as the preferred setting so that it begins streaming once plugged in.


[su_service title=”4. Run a performance test. (See above.)” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Double-check that all is in working order before you go to the trouble of hiding your HDMI cable. Stream an audio-only file, such as a music video of your favorite song, to see how well it works. You’re able to advance to the next stage assuming everything is in order. If that doesn’t fit, you’ll have to find out what’s wrong.


[su_service title=”5. Hide the extended RCA cables. ” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Hiding RCA cables is the same as you read to hide HDMI cable in above section.


[su_label type=”important”]Connect Through a Wireless Transmitter[/su_label]

If you would like to connect your Soundbar with a projector without having to run an extended cable throughout the entire length of your home theater, then you can choose a wireless option. Fortunately, this is not overly complicated.

Our Top Pick
 1Mii B06TX+ Long Range Bluetooth 5.0 Transmitter

Upgrade non-smart/non-Bluetooth TV, PC, Projector to pair Bluetooth headphones speakers for enhancing your hearing or get an undisturbed personal space. No need to replace your old TV, our Bluetooth audio transmitter helps you upgrade the old one and CUT OFF the budget for a new.

However, you will need to keep in mind that low-quality wireless transmitters could result in poor-quality video and audio transmission with some serious lag. This could be highly disruptive to your media experience, so be sure to opt for a high-quality transmitter.

To connect a Soundbar with a projector using a wireless transmitter, consider the following steps:

[su_service title=”1. Check the compatibility with your devices. ” icon=”icon: check” icon_color=”#16a202″ size=”26″]

You should check what sort of communication port a wireless transmitter requires before purchasing it. If you want to use an HDMI wireless transmitter. For example, you’ll need to make sure your projector has an HDMI port.


[su_service title=”2. Purchase a compatible, high-quality wireless transmitter. ” icon=”icon: check” icon_color=”#16a202″ size=”26″]

If you’ve determined what kind of reliability you’ll like. Here you’ll need to make sure the wireless transmitter you’re using is of high quality. Avoid Bluetooth transmitters if at all necessary. They can be less stable with high levels of video and audio transmission.


[su_service title=”3. Plug your transmitter into your projector. ” icon=”icon: check” icon_color=”#16a202″ size=”26″]

You’ll want to plug your transmitter into your projector now that you’ve found the right one. Since you’ve already chosen the right kind of compatibility, this shouldn’t be too difficult.


[su_service title=”4. Connect the transmitter with your Soundbar.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Hiding RCA cables is the same as you re

Now you must attach the transmitter to the Soundbar using the instructions included with your specific transmitter.

Since you won’t have to run an extended cable in your home theatre, using a transmitter is highly recommended. Simply ensure that it is of sufficient consistency and ability to stream your video and audio without lag.


[su_service title=”5. Adjust the preferred input settings on your projector.” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Hiding RCA cables is the same as you read to hide After you’ve linked the units. Make sure your projector’s input settings are set to the source your transmitter is connected to (ex. HDMI or RCA input port).


[su_service title=”6. Run a performance test and enjoy. ” icon=”icon: check” icon_color=”#16a202″ size=”26″]

Hiding RCA cables is the same as you since there are no cables to hide, all you have to do now is test the link and start streaming your media. It’s time to start creating happy memories with your family and friends.

If you want to buy best budget 4K projectors, CLICK HERE. If you want to buy portable speakers for your projector, read my Review Blog.



Leave a Comment